Medical Wire Conductors
The wide range of medical wire applications and performance requirements makes alloy selection a critical design consideration. The choice of conductor material directly influences key characteristics such as electrical conductivity and resistivity, mechanical strength, fatigue resistance, and biocompatibility. Because these properties can significantly impact device performance, reliability, and manufacturability, access to a broad portfolio of engineered alloys and deep material science expertise is essential. MWS provides medical device manufacturers with both the material options and technical guidance needed to optimize wire selection for their specific application requirements.
Copper Alloys
OFHC Copper C101 (99.99%)
OFHC Copper C102 (99.95%)
ETP Copper C110 (99.90%)
Copper alloy conductors are commonly used in electrophysiology catheters, cardiac ablation systems, neurostimulation devices, surgical robotics, miniature cables, and other applications where high electrical conductivity must be combined with enhanced strength and fatigue resistance for reliable performance in dynamic environments.
High Performance Copper Alloys
EHTW – 450 N/mm2
XHTW – 385 N/mm2
MWS's XHTW and EHTW are proprietary copper-silver alloys that deliver greater tensile strength with electrical resistance comparable to pure copper. When flex life and fatigue resistance matter, these high-performance alloys are built to perform. To further tailor wire performance, MWS also offers a variety of plating options, including precious metal and specialty platings, to enhance conductivity, solderability, corrosion resistance, and application-specific functionality.
Stainless Steel
302
304
304 V / LV
316 / L / LVM
Stainless steel conductors are commonly used when strength, corrosion resistance, and biocompatibility are critical. Available in grades including 302, 304V/LV, and 316LVM, stainless steel provides the mechanical performance required for demanding medical applications while maintaining long-term reliability in challenging medical environments.
Nickel Alloys
Ni200
Ni205
Ni270
Monel 400
MP35N (High Performance)
Nickel conductors are often selected for medical applications requiring corrosion resistance, high-temperature performance, and mechanical durability. Their unique properties support long-term reliability in demanding environments. MWS provides high-quality nickel conductors and the material expertise needed to help optimize wire performance for specific application and manufacturing requirements.
Clad Metals
Cu Clad Steel (CCS 30% or 40%)
Cu Clad Stainless Steel (CCSS) 316L
Clad metal conductors are commonly used when conductivity must be balanced with enhanced strength, fatigue resistance, corrosion resistance, or reduced weight. By combining the properties of multiple metals into a single conductor, clad materials provide engineers with greater design flexibility for demanding medical applications.
Precious Metals
Gold
Silver
Platinum
Tungsten
Titanium
Pure precious metal conductors such as gold, silver, platinum, and platinum-iridium are often selected for electrodes, implants, and critical sensing applications, while precious metal plated conductors provide enhanced surface conductivity, solderability, and corrosion resistance while leveraging the strength and cost advantages of an underlying base alloy.
High Performance Copper Alloys vs Pure Copper
| Metal | Copper | XHTW | EHTW |
|---|---|---|---|
| Description | ETP C11000 | Extra High Tensile Wire | Extreme High Tensile Wire |
| Density (lb/cu in) | 0.323 | 0.325 | 0.325 |
| Conductivity (% IACS-Soft) | 100 | 89 | 80 |
| Electrical Resistance (ohms/cir mil ft) | 10.3 | 11.8 | 12.9 |
| Tensile (Soft) ksi | 34 | 50 | 56 |
| Tensile (Hard) ksi | 55 | 62 | 68 |
| Elongation (a) % | 6 to 36 | 10 to 25 | 10 to 30 |
| Solderability | Excellent | Good | Good |
| Weldability | Excellent | Good | Good |
| Bend Test (b) | 100 | 600 | 1,050 |
(a) Tensile and elongation values are nominal and generally size dependent
(b) Fatigue strength compared to annealed copper